Introduction ：

K Series Helical Bevel Gear Reducer for Hard Tooth Surface Helical Gear - Helical Bevel Gear Reducer, gear materials are all 20CrMnTi, after carburizing treatment, tooth surface hardness of 58-62HRC, grinding accuracy of up to 6 levels, especially for high-speed arc teeth, bevel gear after finishing carburizing grinding, so that the tooth surface contact reaches more than 75%. To ensure product reliability and low noise. Reducer reducer main transmission parts bearings are selected imported bearings, seals are selected Taiwan skeleton oil seal, the power from 0.09KW-220KW, output torque up to 120N.M-42000N.M, speed ratio can be from (with 4-pole motor) 8-190, such as with 6-pole or 8-pole motor can obtain lower output speed; If you need a lower output speed can be used in the form of two-stage reducer, can obtain a lower output speed (more than 10,000 speed ratio). If the input is equipped with a continuously variable speed machine, the requirements of variable speed can be realized. Output forms are vertical and horizontal two, the output shaft is divided into solid shaft, hollow shaft (or non-standard production), can be installed in different directions and angles, can be used positive and negative. In addition, it can be equipped with different types of motors (ordinary motors, single-phase motors, explosion-proof motors, variable frequency motors, brake motors, etc.). K series helical gear - spiral bevel gear reducer is widely used in food and grain machinery, printing and packaging machinery, three-dimensional garage equipment, environmental protection machinery, transportation equipment, chemical equipment, metallurgical mining equipment, steel and power equipment, road construction machinery and so on.

Advantage :

1. K series reducer combined with international technical requirements of manufacturing, with high scientific and technological content.

2. this series of gear reducer space saving, reliable and durable, high overload capacity, power up to 200KW or more.

3. low energy consumption, superior performance, reducer efficiency of more than 95%.

4. K series spiral bevel gear reducer vibration is small, low noise, high energy saving.

 5. the selection of high-quality steel material, steel cast iron box, gear surface through high-frequency heat treatment.

6. After precision machining, the reducer that constitutes the helical gear, bevel gear and bevel gear transmission assembly is configured with various types of motors, forming mechatronics and fully ensuring the quality characteristics of the reducer motor products.

Performance characteristics:

1. vertical output, compact structure, hard tooth surface transmission torque, high-precision gear to ensure smooth work, low noise, long life.

2. installation mode: foot installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.

3. input mode: motor direct connection, motor belt connection or input shaft, coupling flange input.

4.output mode: hollow shaft output or solid shaft output, the average efficiency is 94%.

5. and R series combination can get a greater speed ratio.

Technical parameters:

Speed ratio range: basic type 5.36 ~ 197.37, K series /R series combined type can reach 32625

Torque range: 200 ~ 50000 Nm

 Power range: 0.18 ~ 200kW

 Structure form:

K-shaft extension, foot mounted KA- shaft mounted connection

KF- shaft extension, flange mounting KAF- shaft mounting, flange mounting

S- Indicates shaft input This series has the same appearance as the S series reducer and can be used interchangeably. However, under the premise of the same speed ratio, the same power, and the same seat number, the output torque of the K series is greater than the output torque of the S series reducer.